Test the tension.
Trust the Next Step.
Skidmore Wilhelm Rentals
Verify bolt tension before installation with a Skidmore Wilhelm Bolt Tester rental from American Bolting. Whether you work in aerospace, automotive, construction, or manufacturing, rent the equipment you need to test fastener performance with confidence. Contact American Bolting today to reserve your rental.
“Bolt Testing” generally refers to using Skidmore Wilhelm hydraulic load cells, including HS, MZ, S, and other models, to measure fastener performance through:
- Pre-Installation Verification (PIV) Testing and Rotational Capacity (ROCAP) Testing of structural fasteners per AISC/RCSC specifications.
- General fastener testing to establish torque/tension relationships.
- Testing components including, but not limited to, Hex Bolts, Tension Control Bolts, Anchor Bolts, Studs, Lock Nuts, and Direct Tension Indicating Washers.
Skidmore Wilhelm’s hydraulic tension calibrator, also known as a bolt tension calibrator, has been the industry standard for testing high-strength bolts since we invented the technology in the 1950s. These units are required for use on steel buildings, bridges, and other structures that use fasteners in tension-critical joints.
Our Skidmore Wilhelm rentals can be safely used with hand torque wrenches, impact guns, electric wrenches, and hydraulic wrenches.
A better picture of fastener performance.
Pre-installation verification
Test your bolt assembly and installation method before work begins.
Rotational capacity testing
Evaluate applicable structural fastener assemblies with the appropriate testing setup.
Torque / tension relationships
Measure the relationship between applied torque and resulting bolt tension.
Model MZ: Built for Shorter Structural Fasteners
126,000 lbs. of bolt tension capacity
Designed to accommodate shorter grip length bolts, the Skidmore-Wilhelm Model MZ supports testing applications involving thinner structural steel sections and tension-control bolts.
The calibrator clamps to a beam or column and measures the tension generated as a fastener is tightened. Its dial provides a direct reading of bolt tension, helping your team evaluate fastener performance and installation procedures before work begins.
Check Your Fasteners. Confirm Your Procedure.
Use the Model MZ to help verify:
- Your fastener assembly achieves the required minimum bolt tension.
- Your impact wrench setup produces the intended bolt tension in the tested assembly.
- Tension-control bolt tips shear off at the required tension.
- Your crew can achieve proper tension using the selected installation method.
- Your installation tools and equipment are suitable for the application.
Help Reduce Rework and Reinspection
Test your tightening procedure before applying it on the job. By simulating joint conditions in the calibrator, your team can evaluate whether the selected fasteners, tools, and procedure produce the required bolt tension.
Make bolt testing part of your installation process with a Skidmore Wilhelm rentals from American Bolting.
Frequently Asked Questions
What is a Skidmore-Wilhelm bolt tester used for?
A Skidmore-Wilhelm bolt tester measures the tension generated in a fastener as it is tightened. It helps evaluate fastener performance, verify installation procedures, and determine the relationship between applied torque and bolt tension.
Can I rent a Skidmore-Wilhelm bolt tester from American Bolting?
Yes. American Bolting offers Skidmore-Wilhelm bolt tester rentals. Contact our team with your bolt specifications and rental dates to discuss the appropriate equipment and availability.
Which bolt tester should I rent?
The right model depends on your bolt type, diameter, length, and required testing capacity. Share these details with American Bolting so our team can help identify the tester and accessories suited to your application.
What is the Model MZ’s testing capacity?
The Skidmore-Wilhelm Model MZ has a maximum bolt tension capacity of 126,000 lbs. It is designed to accommodate shorter grip length structural fasteners, including applications involving tension-control bolts.
How does the Model MZ measure bolt tension?
The calibrator mounts to a suitable support, such as a beam or column. With the appropriate fixtures installed, the fastener is inserted and tightened. The dial displays the resulting bolt tension. Follow the manufacturer’s instructions for setup and operation.
Can I test tension-control bolts?
Yes, with the appropriate tester configuration and accessories. Testing helps evaluate whether the bolt assembly achieves the required tension when the spline shears off. Contact American Bolting to confirm the setup for your fasteners.
Can a bolt tester help check impact wrench performance?
Yes. A bolt tester measures the tension an impact wrench produces in the tested fastener assembly. This helps evaluate the tool and tightening procedure for that application.
Why test bolts before installation?
Pre-installation testing helps confirm that your fasteners, tools, and tightening procedure can produce the required bolt tension. Identifying issues before installation can help reduce the risk of rework and reinspection.
Does pre-installation testing replace inspection of installed bolts?
No. Testing verifies the performance of the tested assembly and installation procedure. Your team must still follow the project’s installation, quality control, and inspection requirements.
What information should I provide when requesting a rental?
Include your bolt type, diameter, length, testing requirements, rental start date, and expected rental duration. If you are unsure which model or accessories you need, American Bolting can help you review your application.
How do I request a rental quote?
Call American Bolting at 844.486.7783, email sales@americanbolting.com, or complete our rental inquiry form. Share your project details so our team can discuss equipment options, availability, and rental terms.
Let's get your rental started
Share your bolt specifications.
Send the bolt type, diameter, length, and your planned rental dates.
Find the right fit.
Work with our team to confirm the tester and accessories for your application.
Plan the next step.
Confirm availability, rental terms, and equipment arrangements with our team.
A better picture of fastener performance.
Tell us what you need to test and we’ll help you find the right rental setup.
Prefer to talk?
844.486.7783
sales@americanbolting.com